Advanced Configuration and Management Guide

Inbound IP/RIP Neighbor Filter for Port 4/3

FilterID Action Source

--------------------------------------------------------

1

Deny

192.99.26.1/24

1024

Permit

any

X

Neighbor

RIP Router

201.44.67.1/24

Neighbor

RIP Router

192.99.26.1/24

Actions

•An IP/RIP neighbor filter applied to outbound traffic on a port permits or denies advertisement of routes.

•An IP/RIP neighbor filter applied to inbound traffic on a port permits or denies learning of the routes advertised by the neighbor. When the device learns an IP/RIP route, the route is added to the IP/RIP route table.

Scope

You configure IP/RIP neighbor filters globally. They are automatically applied to all RIP ports as soon as you configure them.

Syntax

Use the following CLI commands or Web management interface panels to configure IP/RIP neighbor filters.

Table C.14: IP/RIP Neighbor Filters

CLI syntax

Web management links

 

 

HP9300(config-rip-router)# neighbor <filter-num> permit deny

Configure->RIP->Neighbor Filter

<source-IP-address> any

 

 

 

C - 18