Advanced Configuration and Management Guide

Syntax

Use the following CLI commands or Web management interface panels to configure BGP4 redistribution filters.

Table C.25: BGP4 Redistribution Filters

CLI syntax

Web management links

 

 

HP9300(config-bgp-router)# redistribute rip ospf static

Configure->BGP->Redistribute

[match internal external1 external2] [metric <num>]

 

[route-map <name>] [weight <num>]

 

 

 

NOTE: The optional match internal external1 external2 argument applies only to OSPF.

Layer 4 Filters

Layer 4 filters control IP traffic based on the Layer 3 and Layer 4 information in the packets. On switches and routing switches, Layer 4 filters are access policies that control access to Layer 4 applications based on TCP/UDP or other port number.

TCP/UDP Forwarding Filters

TCP/UDP forwarding filters are the same as TCP/UDP access policies. See “TCP/UDP Access Policies” on page C-9.

C - 28