Advanced Configuration and Management Guide

 

 

Table 8.4: CLI Display of OSPF Route Information (Continued)

 

 

 

 

 

 

 

This Field...

 

Displays...

 

 

 

 

 

 

 

Mask

 

The network mask for the route.

 

 

 

 

 

 

 

Path_Cost

 

The cost of this route path. (A route can have multiple paths. Each

 

 

 

 

path represents a different exit port for the routing switch.)

 

 

 

 

 

 

 

Type2_Cost

 

The type 2 cost of this path.

 

 

 

 

 

 

 

Path_Type

 

The type of path, which can be one of the following:

 

 

 

 

• Inter – The path to the destination passes into another area.

 

 

 

 

• Intra – The path to the destination is entirely within the local

 

 

 

 

 

area.

 

 

 

 

• External1 – The path to the destination is a type 1 external

 

 

 

 

 

route.

 

 

 

 

• External2 – The path to the destination is a type 2 external

 

 

 

 

 

route.

 

 

 

 

 

 

 

Adv_Router

 

The OSPF router that advertised the route to this HP routing switch.

 

 

 

 

 

 

 

Link-State

 

The link state from which the route was calculated.

 

 

 

 

 

 

 

Dest_Type

 

The destination type, which can be one of the following:

 

 

 

 

• ABR – Area Border Router

 

 

 

 

• ASBR – Autonomous System Boundary Router

 

 

 

 

• Network – the network

 

 

 

 

 

 

 

State

 

The route state, which can be one of the following:

 

 

 

 

Changed

 

 

 

 

Invalid

 

 

 

 

Valid

 

 

 

 

This information is used by HP technical support.

 

 

 

 

 

 

 

Tag

 

The external route tag.

 

 

 

 

 

 

 

Flags

 

State information for the route entry. This information is used by HP

 

 

 

 

technical support.

 

 

 

 

 

 

 

Paths

 

The number of paths to the destination.

 

 

 

 

 

 

 

Out_Port

 

The port through which the routing switch reaches the next hop for

 

 

 

 

this route path.

 

 

 

 

 

 

 

Next_Hop

 

The IP address of the next-hop router for this path.

 

 

 

 

 

 

 

Type

 

The route type, which can be one of the following:

 

 

 

 

OSPF

 

 

 

 

• Static Replaced by OSPF

 

 

 

 

 

 

 

Arp_Index

 

The index position in the ARP table of the ARP entry for this path's IP

 

 

 

 

address.

 

 

 

 

 

 

 

 

State

 

State information for the path. This information is used by HP

 

 

 

 

technical support.

 

 

 

 

 

 

 

 

 

 

 

 

 

8 - 44