Configuring VRRP and VRRPE

 

Table 12.6: Web Display of VRRP Statistics (Continued)

 

 

 

 

 

This Field...

Displays...

 

 

 

 

 

Authen Password Mismatch Error

The number of VRRP packets received by the interface that had a

 

 

password value that does not match the password used by the

 

 

interface for authentication.

 

 

 

 

 

Virtual Router ID Error

The number of VRRP packets received by the interface that contained

 

 

a VRID that is not configured on this interface.

 

 

 

 

 

Interface Statistics panel

 

 

 

 

 

 

 

Port

The interface on which VRRP is configured. If VRRP is configured on

 

 

more than one interface, the display lists the statistics separately for

 

 

each interface.

 

 

 

 

 

ID

The VRID.

 

 

 

 

 

State

This routing switch’s VRRP state for the VRID. The state can be one

 

 

of the following:

 

 

• Init – The VRID is not enabled (activated). If the state remains

 

 

Init after you activate the VRID, make sure that the VRID is also

 

 

configured on the other routers and that the routers can

 

 

communicate with each other.

 

 

Note: If the state is Init and the mode is incomplete, make sure

 

 

you have specified the IP address for the VRID.

 

 

• Backup – This routing switch is a Backup for the VRID.

 

 

• Master – This routing switch is the Master for the VRID.

 

 

 

 

 

Receive Pkts Drop – ARP

The number of ARP packets addressed to the VRID that were

 

 

dropped.

 

 

 

 

 

Receive Pkts Drop – IP

The number of IP packets addressed to the VRID that were dropped.

 

 

 

 

 

Receive Mismatch – Port

The number of packets received that did not match the configuration

 

 

for the receiving interface.

 

 

 

 

 

Receive Mismatch – Num of IP

The number of packets received that did not match the configured IP

 

 

addresses.

 

 

 

 

 

Receive Mismatch – IP

The number of packets received that did not match the configured

 

 

Hello interval.

 

 

 

 

 

Receive Mismatch – Hello

The current Master has resigned.

 

 

 

 

 

Rcv Priority Zero from Master

The number of packets received that did not match the configuration

 

 

for the receiving interface.

 

 

 

 

 

Rcv Higher Priority

The number of VRRP packets received by the interface that had a

 

 

higher backup priority for the VRID than this routing switch’s backup

 

 

priority for the VRID.

 

 

 

 

 

Transmit Count – Master

The number of times this routing switch has changed from the backup

 

 

state to the master state for the VRID.

 

 

 

 

 

Transmit Count – Backup

The number of times this routing switch has changed from the master

 

 

state to the backup state for the VRID.

 

 

 

 

12 - 29