Installation and Getting Started Guide
5.Enter a filter ID value from 1 – 32.
6.Select either Permit or Deny.
7.Enter the appropriate number for the destination socket of the application running in the Socket field. If you enter all zeros in this field, the filter will accept any socket.
8.Enter the Source Network Address on which you want to filter traffic. If you enter all zeros in this field, the filter will accept any source network.
9.Enter the address of the Source Node within the source network on which you want to filter traffic.
10.Enter the Destination network number. If you enter all zeros in this field, the filter will accept any destination network number.
11.Enter the Destination Node network number. If you enter all zeros in this field, the filter will accept any destination node network number.
12.Click the Add button to apply the changes to the device’s
13.Select the Forward Filter Group link.
•If the device does not have an IPX forward filter group configured, the Filter Group configuration panel is displayed, as shown in the following example.
•If an IPX forward filter group is already configured and you are adding a new one, click on the Add Forward Filter Group link to display the IPX Filter Group configuration panel, as shown in the following example.
•If you are modifying an existing IPX forward filter group, click on the Modify button to the right of the row describing the group to display the IPX Filter Group configuration panel, as shown in the following example.
14 - 6