Advanced Configuration and Management Guide

•Optional – Define IP prefix lists.

•Optional – Define neighbor distribute lists.

•Optional – Define BGP4 route maps for filtering routes redistributed into RIP and OSPF.

•Optional – Define route flap dampening parameters.

NOTE: When using CLI, you set global level parameters at the BGP CONFIG Level of the CLI. You can reach the BGP CONFIG level by entering router bgp… at the global CONFIG level.

NOTE: When using the Web management interface, you set BGP4 global parameters using the BGP configuration panel, shown in Figure 10.2 on page 10-8.You can access all other parameters using links on the BGP configuration panel or from the Configure->BGP options in the tree view. Select Configure->BGP-General to display the BGP configuration panel.

Figure 10.2 BGP configuration panel

10 - 8