Advanced Configuration and Management Guide

Displaying VLAN Information for Specific Ports

Use one of the following methods to display VLAN information for specific ports.

USING THE CLI

To display VLAN information for all the VLANs of which port 7/1 is a member, enter the following command:

HP9300(config)# show vlans e 7/1

Total PORT-VLAN entries: 3

Maximum PORT-VLAN entries: 8

legend: [S=Slot]

PORT-VLAN 100, Name [None], Priority level0, Spanning tree Off Untagged Ports: (S7) 1 2 3 4

Tagged Ports: None

IP-subnet VLAN 207.95.11.0 255.255.255.0, Dynamic port disabled Static ports: (S7) 1 2

Exclude ports: None

Dynamic ports: None

Syntax: show vlans [<vlan-id> ethernet <portnum>]

The <vlan-id> parameter specifies a VLAN for which you want to display the configuration information. The ethernet <portnum> parameter specifies a port.

USING THE WEB MANAGEMENT INTERFACE

You cannot display port-specific VLAN information using the Web management interface.

16 - 58