STATus:OPERation:QUEStionable:CONDition?

Comments Executable when initiated: Yes

Coupled command: No

Related commands: *OPC, *OPC?, *RST, *WAI, ABORt, INITiate:IMMediate, VINStrument:CONFigure:VME:MEMory:INITiate, VINStrument:CONFigure:LBUS:MEMory:INITiate, STATus:PRESet

*RST Condition: unaffected

Power-on Condition: STATus:OPC:INITiate ON

Example Setting immediate completion mode

STAT:OPC:INIT OFF

Complete immediately for *OPC, etc.

:OPERation:QUEStionable:CONDition?

STATus:OPERation:QUEStionable:CONDition? returns the contents of the appropriate condition register. Reading the register does not affect its contents.

Comments Executable when initiated: Yes

Coupled command: No

Related commands: STATus subsystem, *SRE, *STB?

*RST Condition: all bits of both condition registers are cleared as a result of the state present after *RST, except for the CALibration bit in the Questionable Signal register, which will remain set if the error condition persists.

Example Querying the Operation condition register

STAT:OPER:COND?

Query Operation condition register

:OPERation:QUEStionable:ENABle

STATus:OPERation:QUEStionable:ENABle <unmask > specifies which bits of the associated event register are included in its summary bit. The summary bit is the bit-for-bit logical AND of the event register and the unmasked bit(s).

STATus Subsystem

Command Reference 267

Page 267
Image 267
HP E1429A manual STATusOPERationQUEStionableCONDition?, OPERationQUEStionableENABle