*EMC and *EMC?

Coupled command: No

Related Commands: *EMC, *GMC, *LMC, *RMC

*RST Condition: none; macro definitions are unaffected

Power-On Condition: no macros are defined

Example Define macro to start measurement

*DMC " RESTART","ABOR;INIT"

Define macro

*EMC and *EMC?

*EMC <enable> enables and disables macro usage. When enable is zero, macros usage is disabled. Any non-zero value enables macro usage.

The query form returns 1 if macro usage is enabled, 0 if disabled.

Comments Macro definitions are not affected by this command.

Executable when initiated: Yes

Coupled command: No

*RST Condition: macro usage is disabled

Power-On Condition: macro usage is enabled

*ESE and *ESE?

*ESE <mask> enables one or more event bits of the Standard Event Status Register to be reported in bit 5 (the Standard Event Status Summary Bit) of the Status Byte Register. Mask is the sum of the decimal weights of the bits to be enabled.

The query form returns the current enable mask.

Parameters

Parameter

Parameter

Range of

Default

Name

Type

Values

Units

 

 

 

 

mask

numeric

0 through 255

none

 

 

 

 

A 1 in a bit position enables the corresponding event; a 0 disables it. Comments Executable when initiated: Yes

Chapter 4

Command Reference 300

Page 300
Image 300
HP E1429A manual EMC and *EMC?, ESE and *ESE?, Example Define macro to start measurement