4.Close the lever to lock the drive into place.

Installing internal components

Removing the access panel

1.Lift the access panel latch.

2.Slide the access panel backwards approximately 2 cm (0.75 in).

3.Remove the access panel by lifting it straight up and off the server blade.

After the access panel is off, you can do the following:

Add an additional processor (“Processor and heatsink module”).

Add additional memory DIMMs (“DIMMs”).

Add additional mezzanine cards (“Mezzanine cards”).

38 Optional components

Page 38
Image 38
HP nPartitions (nPars) manual Installing internal components, Removing the access panel