2 Site preparation
The HP Integrity BL860c i4 Server Blade does not have cooling or power systems. Cooling and power is provided by the
IMPORTANT: To avoid hardware damage, allow the thermal mass of the product to equalize to the temperature and humidity of the installation facility after removing the shipping materials. A minimum of one hour per 10°C (50°F) of temperature difference between the shipping facility and installation facility is required
Server blade dimensions and weight
Table 1 Server blade dimensions and weight for the BL860c i4
Dimensions | value |
Height | 36.63 cm (14.42 in.) |
Width | 5.14 cm (2.025 in.) |
Depth | 48.51 cm (19.1 in.) |
Weight | Unloaded: 8.6 kg (19 lb) |
| Fully loaded: 11.3 kg (25 lb) |
Table 2 Blade Link dimensions and weight
Blade Link type | Height | Width | Weight |
BL1 (BL860 i4) | 44 mm (1.73 in) | 51 mm (2 in) | .5 lb (.22 kg) |
BL2 (BL870 i4) | 44 mm (1.73 in) | 106 mm (4.17 in) | 1 lb (.45 kg) |
BL4 (BL890 i4) | 44 mm (1.73 in) | 212 mm (8.34 in) | 2 lb (.90 kg) |
Enclosure information
All three blade configurations are supported in HP c7000 and c3000 Enclosures. For more enclosure information see:
Enclosure environmental specifications
NOTE: This information is for both c3000 and c7000 Enclosures.
Specification | Value |
Temperature range 1 |
|
Operating | 10°C to 35°C (50°F to 95°F) |
Wet bulb temperature |
|
Operating | 28ºC (82.4ºF) |
38.7ºC (101.7ºF) | |
Relative humidity (noncondensing)2 |
|
Server blade dimensions and weight | 9 |
