Table 15 UEFI Shell Commands (continued)
UEFI Shell Command | Definition |
ls | Displays a list of files and subdirectories in a directory |
map | Displays or defines mappings |
memconfig | Set/View memory configuration settings |
memmap | Displays the memory map |
mkdir | Creates one or more directories |
mm | Displays or modifies MEM/MMIO/IO/PCI/PCIE address space |
mode | Displays or changes the console output device mode |
mount | Mounts a file system on a block device |
mv | one or more files or directories to another location |
openinfo | Displays the protocols and agents associated with a handle |
palproc | Make a PAL procedure call |
pause | Prints a message and waits for keyboard input |
pci | Displays PCI device list or PCI function configuration space |
ping | Ping a target machine with UEFI network stack |
reconnect | Reconnects one or more UEFI drivers to a device |
reset | Resets the system |
rm | Deletes one or more files or directories |
salproc | Make a SAL procedure call |
secconfig | View/configure system security features |
sermode | Sets serial port attributes |
set | Displays or modifies UEFI Shell environment variables |
setsize | Set the size of a file |
shift | Shifts batch file input parameter positions |
smbiosview | Displays SMBIOS information |
stall | Stalls the processor for the specified number of microseconds |
tapeboot | Boot from tape |
tftp | Perform TFTP operation |
time | Displays or changes the current system time |
timezone | Displays or sets time zone information |
touch | Updates filename timestamp with current system date and time |
type | Displays file contents |
unload | Unloads a UEFI driver |
ver | Displays UEFI Firmware version information |
vol | Displays or changes a file system volume label |
xchar | Turn on/off extended character features |
