CAUTION: During installation, after removing the protective cover from the heatsink:
•Do not touch or come into contact with the thermal interface material.
•Immediately install the heatsink.
CAUTION: To avoid damage to the server blade and processor, ensure the processor heatsink locking handle is fully back against the stops, rotated about 120° back. Also verify that the plastic tabs on the processor heatsink are pulled fully out before installation.
5.Install the heatsink over the load posts.
CAUTION: Do not lower the heatsink locking handle before pushing the plastic locking tabs into place.
Installing internal components | 41 |
