Load an original document into the ADF, Length | Lexmark X6100

Load up to:	Make sure:
100 sheets of	• The print side of the paper faces you.
custom size paper	• Your paper size fits within these dimensions:
	Width
	•	76 - 216 mm
	•	3.0 - 8.5 inches
	Length
	•	127 - 432 mm
	•	5.0 - 17.0 inches
	• The paper guide rests against the left edge of the paper.

25 iron-on	• You follow the loading instructions on the iron-on transfer
transfers	packaging.
	• The blank side of the transfers faces you.
	• The paper guide is against the left edge of the iron-on
	transfers.

20 sheets of	• The banner paper is designed for use with inkjet printers.
banner paper	• You select Letter Banner or A4 Banner in Print
	Properties. For help, see “Using Print Properties” on
	page 19. Failure to do so will cause a paper jam.
	• You remove any paper from the paper support before
	inserting banner paper.
	• Place a stack of banner paper with only the number of
	sheets you need to print your banner on top of the
	All-In-One.

Note: The paper exit tray can hold up to 50 sheets of paper.

Load an original document into the ADF

You can load up to 50 sheets of your original document (text side up) in the ADF (available on some models) for scans, copies, and faxes.

28

Image 34

Lexmark X6100 manual Load an original document into the ADF, Length

Contents

X6100 Series United States Government Rights Contents Faxing Troubleshooting IiiPage Finding more information Your All-In-One comes with many helpful resources Http//support.lexmark.com Setting up your All-In-One Set up the All-In-One Telephone Wall jack port Answering machine Port Connecting directly to a telephone wall jack Connecting to a telephonePage Connecting to an answering machine Connecting to a computer modem Learning about your All-In-One Understand the All-In-One parts Lexmark X6100 Series with an ADF Scanner unit Scanner lock Scanner support USB cable port Use When you want to Use the control panel Press Scan Or symbol Enter text on the control panel Using the Fax Setup Utility Use the All-In-One softwarePage Following table contains the Fax Setup Utility tabs Using the Lexmark All-In-One Center Using Print PropertiesPage Using the Lexmark X6100 Series Photo Editor Using the Lexmark Solution Center From this area or tab You can Using Optical Character Recognition Loading paper and originals Load plain paper into the paper supportPage Page Load up to Make sure Load an original document into the ADF LengthPage Load an original document on the scanner glass Copy using the control panel and the scanner glass CopyingPage Copy using the control panel and the ADF Copy using the All-In-One software and scanner glass Click See More Copy Settings Copy using the All-In-One software and ADF Copy mode Control panel menus Repeat Image SET Defaults Scan using the control panel and the scanner glass ScanningPage Scan using the All-In-One software and the scanner glass Page Scan using the control panel and the ADF Scan using the All-In-One software and the ADF Scan multiple images Mail a scanned image or document Save an image on your computer Enlarge or reduce documents Scan mode After two minutes Print a document PrintingPrint collated copies Print an image as a multi-page poster Print more than one page on a sheet of paperPrint last page first Print repeating images Print two images on one Print a banner Click PropertiesPage Faxing Receive a fax Automatically Manually Answering machine Send a faxUse the control panel and scanner glass Press Black or Color Page Use the control panel and ADF Send a fax from your PC Use the All-In-One Center Using the control panel Setting Up Speed DialUsing the computer recommended Customize a fax job Sending a multi-page fax to a group Using Speed DialTo delay sending a broadcast fax To send a broadcast fax immediately Sending a delayed fax using speed dial Manually dialing a fax while listening to a telephone line Distinctive ring patternsPage To customize your settings Use the Fax Setup Utility Ringer Tone Edit Speed Dial Advanced Fax options Activity report Max send speed From this Advanced Fax Option You can select UAE Networking Maintaining your All-In-One Replace the print cartridgesPage Page Page Select To solve print quality problems After installing new cartridgesAlign the print cartridges Improve print quality Page Nozzles Clean the scanner glass Preserve the print cartridges Order supplies Setup troubleshooting TroubleshootingGeneral troubleshooting Problem Go to Document does not print Document prints slowly Document misfeeds or jams Paper misfeeds or multiple sheets feed Paper jams If a paper jam occurs in the ADF Document prints poorly Document is too light or too dark Characters are missing or unexpected Vertical, straight lines are not smoothPrint is too dark or smudged Print quality is poor at the edges Display language is not preferableDate and time on the display are incorrect Colors are faded or not printing completely All-In-One is not communicating with the computer Black and white copy quality is unsatisfactoryPage Scanned image is unsatisfactorily cropped To adjust how the image is croppedTo turn auto-cropping off Scanner unit will not close Fax settings need adjustmentEdges of my document are cropped All-In-One is scanning and copying without a pre-scan Ink Low message Error messages and flashing lights100 Paper Jam message 101 Hardware ErrorPaper Out message Cartridge Error 50C 102 Power light blinks twice More troubleshooting optionsRemove and reinstall the software 103 Fax troubleshooting 104 105 To connect without an unsupported line Using an unsupported line106 To connect with an unsupported line 107 Using the X6100 Series All-In-One in Germany 108 109 Compliance statement 110 Copyright advisory Index 111 112 113 114