DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Object Repair Procedures
Page10-1052PR-MAINT (Maintenance Processor)
10
System Technician-Demanded Tests:
Descriptions and Error Codes
Always investigate tests in the order presented in the table below. By clearing
error codes associated with the
MTP Reset Test,
for example, you may also clear
errors generated from other tests in the testing sequence.
Notes:
a. Refer to PROCR for a description of these tests.
b. Refer to MEMORY [386 systems only] for a description of these tests.
1. D = Destructive; ND = Nondestructive
Order of Investigation Short Test
Sequence Long Test
Sequence D/ND1
Processor Software Initiated Interrupt Test (#77) (a) X X ND
Processor ROM Checksum Test (#80) (a) X X ND
Processor Non-maskable Interrupt Test (#82) (a) X X ND
Processor Sanity Timer Test (#83) (a) X D
MTP Reset Test (#101) X D
MTP Dual Port Ram Test (#104) X D
MTP Sanity Handshake Test (#106) X X ND
MAP Manager I Loop Around Test (#228) X X ND
MTP Analog Loop Around Test (#103) X X ND
MTP Outpulse Relay Test (#102) X X ND
MTP Aux Loop Around Test (#229) X X ND
Read All Memory Test (#85)(b) X ND
Memory Error Detection Test (#87)(b) X X ND
Text Checksum Test (#86)(b) X ND
Memory Functional Test (#332) (b) X D
Memory Board Check Test (#631) (b) X X ND