DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-301status system
8
Output
The following example shows the output for the status synchro nizatio n
command.
Field descriptions
status system
This command displays the status, mode, and operational at tributes of the
SPE(s), TDM and Packet busses, tone-clock circuit pack(s), expansion interface
links (exp-links), and emergency transfer switch of single or all cabinets in the
system.
!CAUTION:

The purpose of this command is to provide general inf ormation about the

cabinet status. This information may not display correctly when the cabinet

is in a transient period. In this case, wait for 1 minute and enter the

command again.

Stratum Level Synchronization stratum level (3 or 4)
Maintenance
Name: Either TONE-BD, DS1-BD, or STRAT-3.
Physical
Location Board location of the selected DS1 or tone-clock circuit pack
(cabinet-carrier-slot for a DS1; cabinet-carrier for a tone-clock)
Switching
Capability Whether the on-line reference for synchronization can be switched
(Enabled or Disabled)
Excessive
Reference
Switching
High-level description of how many times the synchronization
reference has been switched. If excessive reference switching is
taking place (sync error 1793 is at threshold), this field displays
Yes; otherwise No displays.
status synchronization
SYNCHRONIZATION STATUS
Stratum Level:4
Maintenance Name: TONE-BD Physical Location: 01A
Switching Capability: Enabled
Excessive Reference Switching: No