DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-74display synchro nization
8
display synchronization
This command calls up the synchronization form where the administered
synchronization stratum and reference sources are displayed. (No changes can
be made to the system synchronization with this command.)
Feature Intera c tions
■A DS1 interface or a UDS1 board that has been selected as either a
primary or secondary synchronization source cannot be removed on the
DS1 circuit pack administration form or the regular circuit pack
administration form.
Output
The following example shows the output for the display sync hro nization
command.
1. Refer to the Report Scheduler an d System Printer feature specifi cation for more details.
Identification: Depends on the hardware that is physically connected to the port:
If hardware is The field contains
station station extension
trunk trunk group and member number)
modem pool modem pool group number
Action/Object Qualifier Qualifier Description Permissions Defaults Feature
Interactions
display
synchron-
ization
print
schedule
Report sent to printer
Command is validated and t hen a
scheduling form displays to sched ule
execution of the command. The
command is then placed in the
command queue and is executed at
the specified time. The inf ormation
displayed by the command is se nt to
the system printer instead of the
screen.1
Examples:
display synchronization
display synchronization print
display synchronization schedu le
init
inads
craft
cust
rcust
bcms
browse
none See below