DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-2busyout board
8
Feature Intera c tions
■If there is an active call on the specified access endpoint, this command
causes the call to drop.
Output
The following example shows the output for the busyou t access-endpoint
22502 command and assumes that access endpoint ports for extension 22502
are in cabinet 1, carrier C, slot 11, circuit 1 to 6. The responses display on a
test-by-test basis with one line of data for each test result.
Field descriptions
busyout board
This command puts all the ports associated with the specified access endpoint
in a maintenance busy (craft busy) state. No periodic or scheduled tests are
performed on the busied out access endpoint ports until they are released. When
the access endpoint ports are maintenance busy, the access endpoint is
removed from active service on the switch, meaning that n o call processing
activity can include the busied objects because terminals on the administered
Port Port address (cabinet-carrier-slot-circuit)
Maintenance Name Name of maintenance object (wideband access endpoint =
WAE-PORT; single port access endpoint = TIE-DS1)
Alt. Name The alternate way of identifying the maintenance object. This field
contains the extension number of the access endpoint.
Result Test result: Pass, Fail, Abort
Error Code Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
busyout access-endpoint 22502 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1101 WAE-PORT 22502 PASS
01C1102 WAE-PORT 22502 PASS
01C1103 WAE-PORT 22502 PASS
01C1104 WAE-PORT 22502 PASS
01C1105 WAE-PORT 22502 PASS
01C1106 WAE-PORT 22502 PASS
Command Successfully Completed