DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-215status access-endpoint
8
Output
The following output example is a display of the status access-endpoint 22502
command. Assume that access endpoint ports for extension 22502 are in
cabinet 1, carrier C, slot 11, circuit 1 to 6 — that access endpoints are connected
on an active call to ports 7 to 12 of the board in location 1B19 (cabinet 1, carrier
B, slot 19). This means that port 01C1101 connects to 01B1907, port 01C1102
connects to 01B1908, and port 01C1103 connects to 01B1909 .
Field descriptions
Extension The extension of the access endpoint to be displayed.
(Starting)
Port Port locations of the access endpoint. For wideband access endpoint,
the location shown is that of the starting port.
Communication
Type The valid voice and data communication type that the a ccess
endpoint is administered. The options are: 56k-data, 64k-data,
voice-grade-data, and wideband.
Width For communication types of 56k-data, 64k-data, and voice-grad e
data, the width value is 1. For communication type of wideband, this
field displays the number of DS0s that makes up the access endpoint.
Service State Whether the access endpoint is in-service or out-of-service. One of the
following states displays: in-service/active, in-service/idle, and
out-of-service.
Connected
Ports Port location connected to the access endpoint for an active call. For
wideband access endpoint connection, all ports connected to the
wideband access endpoint are listed.
status access-endpoint 22502 page 1 of 1
ACCESS-ENDPOINT STATUS
Extension: 22502
(Starting) Port: 01C1101
Communication Type: wideband
Width: 6
Service State: in-service/active
Connected Ports: 01B1907 01B1908 01B1909
01B1910 01B1911 01B1912
Command Successfully Completed