DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page8-185release spe-standby
8
release spe-standby
The release spe-standby command removes busyout statuses of standby SPEs.
Memory shadowing restores, a memory refresh of the standby SPE occurs, and 1
minute later the equivalent of scheduled standby SPE maintenance returns the
standby SPE’s Fault Severity Level to its appropriate value.
Standby SPE releases are allowed if communication to the standby is down.
Feature Intera c tions
When standby SPEs release a memory, a refresh executes and the standby Fault
Severity Level lowers to its appropriate level. One minute later, the equiva lent of
scheduled standby SPE maintenance executes and a sp ontaneous SPE
interchange might occur, depending of Fault Severity Levels of t he two SPE’s.
If the standby SPE is in poor health, memory shadowing must not enable
(communication to the standby is impossible, if it is enabled). Then the standby
SPE releases successfully.
Output
The following output example is a display of the release spe-standby command
and assumes that the standby SPE is located in carrie r “B.”
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults Feature
Interactions
release
spe-standby init
inads
craft
none see below
Port Port address displays the standby SPE’s cabinet and carrier
location. (01A or 01B)
Maintenance Name STBY-SPE
release spe-standby SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01B STBY-SPE PASS
Command successfully completed