DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Object Repair Procedures
Page10-1254TAPE (Tape Unit) [G3iV1.1-286]
10
Figure 10-90. Front View of the Tape Drive
To position the tape drive head properly for cleaning, do the following:
1. Install a tape cartridge into the drive with the power on.
2. Wait 10 seconds or until the spinning of the tape stops.
3. Remove the tape cartridge.
!CAUTION:
The tape drive head should be cleaned by using only Freon TF and polyurethane swabs. These products are usually available in V CR head cleaning kits sold in video stores.
4. Wet the swab with the Freon TF solution.
5. Using a "side-to-side" motion, wipe the tape drive head.
TAPE DRIVE HEAD
CLEANING MOTION
CAPSTAN
PUSH BACK
THE TAPE
ACCESS DOOR
YELLOW LED