DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Error Messages
PageA-3busyout cdr-link
A
If the specified board is part of the DCS link, the board cannot b e busied out unless the
link itself is busied out first. If the DCS link is not bu s ied out, the following message will
be displayed:
Must first busyout SCI link
If the specified board is an EI board and it is part of the active link, the following
message will be displayed:
Illegal Command for active object; use ’set’ to switch to standby
If a busyout is attempted on an invalid board in the service slot, the following message is
displayed:
Board invalid
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
busyout cdr-link
This command will busyout a maintenance object associated with the specified call
detail recording (cdr)-link.
Help Messages
If the system technician presses HELP after entering "busyout cdr-link," the following
message will be displayed:
primary secondary
Error Messages
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict