DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Object Repair Procedures

Page10-1242TAPE (Tape Unit) [G3iV1.1-286]

10
Tape Reset Test (#67)

This test resets the tape portion of the Processor on the Maintenance/Tape

Processor (PR-MAINT), and it resets the shared RAM on the Processor circuit

pack (TN770). The test can pass when no drive is present because it never

accesses the tape drive.

Status Request Test (#69)

This test requests the Maintenance/Tape Processor (MTP) firmware on the TN773

Processor circuit pack for the current Tape Unit status and displays the results.

Table 10-427. TEST #66 Tape Diagnostic Test
Error
Code Test
Result Description/ Recommendation
1029 to
2051 ABORT Refer to the STBY-SPE (Standby SPE) Maintenance documentation for
a description of these error codes.
9000’s ABORT or
FAIL Refer to Table A in ‘‘Tape Unit Aux Data/Error Codes Tables’’ and follow
the recommended repair strategy for specific Aux Data.
Any
Others ABORT or
FAIL Refer to Table B in ‘‘Tape Unit Aux Data/Error Codes Tables’’ and follow
the recommended repair strategy for specific Aux Data.
PASS This is a comprehensive test of the Tape Unit. The test verifies that the
tape drive is in good working order.
Continued on next page
Table 10-428. TEST #67 Tape Reset Test
Error
Code Test
Result Description/ Recommendation
1029 to
2051 ABORT Refer to the STBY-SPE (Standby SPE) Maintenance documentation for a
description of these error codes.
9000’s FAIL Refer to Table A in ‘‘Tape Unit Aux Data/Error Codes Tables’’ and follow the
recommended repair strategy for specific Aux Data.
Any
Others FAIL R efer to Table B in ‘‘Tape Unit Aux Data/Error Codes Tables’’ and follow the
recommended repair strategy for specific Aux Data.
PASS Communication with the tape processor is possible at a very basic level.
Continued on next page