DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Object Repair Procedures

Page10-1449UDS1-BD (UDS1 Interface Circuit Pack)

10
NPE Connection Audit Test (#50)

The system sends a message to the on-board microprocessor to update the

network connectivity translation for the SCOTCH-NPE chip on the circuit p ack.

1. D = Destructive; ND = Nondestructive
Far CSU Loopback Test
(#1213) XD
One-Way Span Test
(#1214) XD
Inject Single Bit Error
(#1215) XD
End Loopback/Span Test
(#1216) XD
Table 10-490. TEST #50 NPE Connect ion Audit Test
Error
Code Test
Result Description/ Recommendation
None
2100 ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort, escalate the problem.
1019 ABORT The test aborted because a test was already running on the port.
1. Retry the command at 1 minute intervals for a maximum of 5 times.
2. If the test continues to abort, escalate the problem.
FAIL Internal System Error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort/fail, escalate the problem.
PASS The circuit pack’s SCOTCH-NPE chip have been updated with its
translation.
Continued on next page
Table 10-489. System Technician-Demanded Tests: Descriptions and Error Codes — Continued
Order of Investigation Short Test
Sequence Long Test
Sequence Reset Board
Sequence test ds1-loop
Command D/ND1
Continued on next page