DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids

Page8-396test tdm

8
test tdm

This command tests all the time slots on a bus associated with a PPN or an EPN.

1. If no alarms are registered against th e maintenance object then the test se quence is run only once. The
long clear
option forces a clear of al l alarms if no errors are en countered during testing. Th e
short clear
option only clears
alarms pertinent to tests in th e short sequence.
2. Refer to the Report Scheduler an d System Printer feature specifi cation for more details.
Action/
Object Qualifier Qualifier Description Permissions Defaults Feature
Interactions
test tdm
pn number
short
long
repeat number
clear
schedule
nn
= number of the port network to
have its TDM bus tested. Both
halves (“a” and “b”) of the TDM
bus are tested.
Option for a brief series of
nondestructive diagnostic tests.
Option for a longer, more
comprehensive series of both
destructive and nondestr uctive
diagnostic tests.
How many times each test in the
sequence is repeated (1- 100)
This option causes the test
sequence (short or long) to repeat
until the alarm (if any) is cleared or
a single test in the sequenc e fails.1
Command is validated and th en a
scheduling form displays to
schedule execution of th e
command. The command is then
placed in the command queue an d
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.2
Examples:
test tdm port-network 1 l
test tdm port-network 2 sh r 2
test tdm port-network 2 sh sch
test tdm port-network 1 l r 25
test tdm port-network 2
test tdm port-network 1 c
init
inads
craft
Test
Sequence
= short;
Repeat = 1
none