DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127 Issue 1
August 1997
Maintenance Object Repair Procedures

Page10-191BRI-SET, ASAI-ADJ, BRI-DAT

10
System Technician-Demanded Tests:
Descriptions and Error Codes

When inspecting errors in the system and deciding which ones to address,

always investigate errors associated with the circuit pack and port first. Clearing

these error codes first may also clear errors generated against the end point.

When all circuit pack and port errors have been cleared, and errors still exist

against the endpoint, always investigate errors in the order they are presented in

the table below. By clearing error codes associated with the

Signaling Link Status Test,

for example, you may also clear errors generated from other tests in

the testing sequence.
65 Bearer Service
Not Implemented Requested service not implemented in switch or
endpoint.
69 Requested
Facility Not
Implemented
Requested service not supported in switch or
endpoint.
1. Consult switch and endpoint documentation to
determine service support.
2. If Step 1 does not resolve the problem, escalate
to the next tier.
ADJUNCT/SWITCH ERROR CONDITIONS
81 Invalid CRV An invalid CRV was sent by the adjunct.
1. This may indicate a CRV inconsistency between
the switch and the adjunct. See the CallVisor
protocol reference manual.
2. If step 1 does not resolve the problem, escalate
to the next tier.
Table 10-68. System Technician-Demanded Tests: BRI-SET
Order of Investigation Short Test
Sequence Long Test
Sequence D/ND1
Signaling Link Status Test (#626) X X ND
BRI XID Test (#628) X X ND
BRI Layer 3 Query (#629) X (a) X (a) ND
Continued on next page
Table 10-67. ISDN-BRI Cause Values — Continued
Code Explanation Recommendation
Continued on next page