11.DISPLAY AND OPERATION SETTINGS (GOT SET UP)
Setting screen for display and setting screen for operation can be displayed from the utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
Item | Description | Reference | |
Display | Language, opening screen time, screen save time, screen save backlight, battery alarm display and invert colors | ||
|
| ||
Adjusting brightness and contrast | |||
| |||
|
|
| |
| Buzzer volume, window move buzzer volume, key sensitivity, key reaction speed, touch detection mode | ||
|
|
| |
| Security setting | ||
Operation |
|
| |
Utility call key | |||
|
|
| |
| Touch panel calibration | ||
|
|
| |
| USB mouse/keyboard setting | ||
|
|
| |
Transparent mode | Ch No. | ||
|
|
| |
| Setting the storage locations for backup data and backup settings, and setting the maximum number of backup | ||
| data | ||
Backup/restoration |
| ||
|
| ||
Setting the CPU No. setting at backup to "YES" or "NO" | |||
| |||
|
|
| |
| Trigger backup settings | ||
|
|
| |
Behavior of duplicate IPs | Setting the GOT operation when a device with the same IP address as that of the GOT is added to the network | ||
afterwards. | |||
|
|
|
11.1Display Setting
11.1.1Function of Display
Setting regarding display is possible.
The items which can be set are shown below. When each item part is touched, the respective setting becomes possible.
Item |
| Description | Setting range | |
|
|
| (Japanese) | |
|
|
| (English) | |
| Confirmation of the current language and switching language | (Chinese (Simplified)) | ||
Language*1 | can be performed regarding with the language displayed by | (Chinese (Traditional)) | ||
| utility and dialog box. | (Korean) | ||
|
|
| ||
|
|
| (German) | |
|
|
| (At factory shipment: User's selection) | |
|
|
|
| |
Opening screen time | The title display period at the main unit boot can be set. | 0 to 60 seconds*2 | ||
(At factory shipment: 5 seconds) | ||||
|
|
| ||
|
|
|
| |
Screen save time | The period from the user stops the touch panel operation till | 0 to 60 minutes | ||
the screen save function starts can be set. | (At factory shipment: 5 seconds) | |||
| ||||
|
|
|
| |
Screen save backlight | Whether turning ON or OFF the backlight simultaneously at | ON/OFF | ||
the start of the screen save function can be specified. | (At factory shipment: OFF) | |||
| ||||
|
|
|
| |
Battery alarm display | Whether to display system alarm when the voltage of the GOT | ON/OFF | ||
internal battery has dropped can be specified. | (At factory shipment: OFF) | |||
| ||||
|
|
|
| |
Brightness, contrast | The brightness can be adjusted. | - | ||
| ||||
| ||||
|
|
| ||
|
|
|
| |
Invert colors | For the | ON/OFF | ||
(only | invert the displayed colors can be specified. | (At factory shipment: OFF) | ||
|
|
|
| |
*1 Only selectable languages are displayed.
The selectable languages differ depending on the fonts installed in the GOT. For details of the fonts, refer to the following manual.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
*2 Setting 0 does not hide the title screen.
The title screen is always displayed for 4 seconds or longer (which changes depending on the project data contents).
|
|
|
|
|
|
|
| 9 |
|
|
|
| UTILITY FUNCTION |
|
|
|
|
| |
|
|
|
| |
|
| 10 |
| |
| COMMUNICATION INTERFACE SETTING | (COMMUNICATION SETTING) |
| |
|
|
|
| |
|
|
|
| |
|
| 11 |
| |
| DISPLAY AND OPERATION SETTINGS | (GOT SET UP) |
| |
|
|
|
| |
|
|
|
| |
|
| 12 |
| |
| CLOCK SETTINGS AND BATTERY STATUS DISPLAY | (TIME SETTING AND DISPLAY) |
| |
|
|
|
| |
|
|
|
| |
|
| 13 |
| |
| FILE DISPLAY AND COPY (PROGRAM/DATA | CONTROL) |
| |
|
|
|
| |
|
|
|
| |
|
| 14 |
| |
GOT SELF CHECK | (DEBUG AND SELF | CHECK) |
| |
|
|
|
| |
|
|
|
| |
|
| 15 |
| |
|
| CLEANING DISPLAY | SECTION (CLEAN) |
|
|
|
|
| |
|
|
|
| |
|
| 16 |
| |
INSTALLATION OF | COREOS, BOOTOS | AND STANDARD |
| |
|
|
|
|
|
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP) | 11 - 1 |
11.1 Display Setting |
|