Mitsubishi Electronics GOT1000 9.3.3Basic operation of settings change, Change of setting value

9.3.3Basic operation of settings change

Change of setting value

Setting item Select button Setting item Select button

(1)Setting item, select button

Touch the select button to change the settings.

The setting methods differ depending on the setting items. The following types of setting method are available.

(a)Switch the setting value.

Touch the button to switch the setting value as shown in ON OFF .

(b)Enter the setting value with a keyboard.

It is a key for inputting the numerical value. Touching this button displays a keyboard on the GOT screen. For the operation of keyboard, refer to the next page.

(c)Move to another setting screen.

Touching this button moves to another setting screen.

For the setting method of each setting item, refer to the setting operation of each setting screen.

(2)[OK] button, [Cancel] button, [ ] (Close/Return) button Reflect or cancel the changed settings.

(a)[OK] button

Touching this button reflects the changed settings.

(b)[Cancel] button

Touching this button cancels the changed settings and return to the previous screen.

(c)[ ] (Close/Return) button

Touching this button closes the screen. Depending on the setting item, the GOT restarts.

If [ ] button is touched without touching [OK] button, the following dialog box will be displayed. (If the settings are not changed, the dialog box is not displayed.)

Operate following the message of the dialog box.

			9
			UTILITY FUNCTION
		10
	COMMUNICATION INTERFACE SETTING		(COMMUNICATION SETTING)
		11
	DISPLAY AND OPERATION SETTINGS		(GOT SET UP)
		12
	CLOCK SETTINGS AND BATTERY STATUS DISPLAY		(TIME SETTING AND DISPLAY)
		13
	FILE DISPLAY AND COPY (PROGRAM/DATA		CONTROL)
		14
GOT SELF CHECK		(DEBUG AND SELF	CHECK)
		15
		CLEANING DISPLAY	SECTION (CLEAN)
		16
INSTALLATION OF		COREOS, BOOTOS	AND STANDARD

9. UTILITY FUNCTION	9 - 9
9.3 Utility Display