8.5 Protective Cover for Oil

Use of the protective cover for oil improves waterproof property, oil resistance, and chemical resistance of the GOT.

8.5.1Applicable protective cover for oil

The following protective cover for oil is applicable for GT14.

Product name

Model name

Description

Protective cover for oil

GT05-50PCO

5.7" protective cover for oil

 

 

 

8.5.2Installing procedure

POINT

Before attaching protective cover for oil

A protective film is attached on the display area when the GOT is shipped. Make sure to remove the protective film before attaching the protective cover for oil.

For attaching the protective cover for oil to the GOT already mounted on the control panel, follow the procedures as below.

•Remove the GOT from the control panel.

Make sure to externally shut off all phases of the power supply and remove all cables from the GOT in advance.

•Clean dirt off surfaces of the GOT and control panel.

1

OVERVIEW

2

CONFIGURATION

SYSTEM

3

SPECIFICATIONS

4

PARTS NAME

GOT

Protective Cover For oil

Please do not pull the oil cover more than the necessity, and do not bend it extremely. The seat part and the rubber part in the display part might flake off.

Protective Cover For oil

1.

2.

Position the POWER LED frame of the cover to the POWER LED on the GOT front face, and the direction of the cover is decided.

One corner of the cover is pulled outside, and it hangs it on the corner of the front panel of GOT.

5

EMC DIRECTIVE

STANDARDS AND

UL, cUL

6

INSTALLATION

7

The corner is hung.

GOT

WIRING 8

OPTION

8. OPTION

8 - 7

8.5 Protective Cover for Oil