16.3.2Installing using the program/data control function (Utility)
For details on program/data control function, refer to the following.
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
POINT
Precaution on executing program/data control function
When execute program/data control function, standard monitor OS has to be installed in GOT in advance. Thus, this function cannot be used for the initial installation of standard monitor OS after purchasing GOT.
Install standard monitor OS by the following two methods.
(1)GT Designer3
(2)Installing when starting the GOT
Operation procedure
(1)When installing with SD card
|
|
|
| 9 |
|
| UTILITY FUNCTION |
|
|
| |
|
| |
10 |
| |
COMMUNICATION INTERFACE SETTING | (COMMUNICATION SETTING) |
|
|
| |
|
| |
11 |
| |
AND SETTINGS | UP) | |
Touch [Install]
Now installing BootOS.
Reboot.
1. Power OFF the GOT. After SD card access LED is off, install the SD card in which BootOS, standard monitor OS or project data is stored in the SD card interface of GOT.
2.
3. Display the program/data control function screen (Utility) on the GOT, and install BootOS, standard monitor OS from the SD card to GOT.
4. The SD card access LED is lit during the install execution.
Do not pull out the SD card or power off the GOT while the SD card access LED is lit.
5. The GOT restarts automatically after the installation is completed.
6. After confirming normal restart, switch off the SD card access switch of the GOT. Confirm that the card access LED is not lit, and remove the SD card from the SD card interface of the GOT.
| DISPLAY | OPERATION | (GOT SET |
|
|
|
| ||
12 |
| |||
| CLOCK SETTINGS AND | BATTERY STATUS DISPLAY | (TIME SETTING AND DISPLAY) |
|
|
|
| ||
|
| |||
| 13 |
| ||
| FILE DISPLAY AND | COPY (PROGRAM/DATA | CONTROL) |
|
|
|
| ||
|
| |||
| 14 |
| ||
GOT SELF CHECK | (DEBUG AND SELF | CHECK) |
| |
|
| |||
|
|
| ||
15 |
| |||
| CLEANING DISPLAY | SECTION (CLEAN) |
| |
|
|
| ||
|
| |||
| 16 |
| ||
| INSTALLATION OF | COREOS, BOOTOS AND | STANDARD MONITOR OS |
|
|
|
|
|
|
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS | 16 - 7 |
16.3 BootOS and Standard Monitor OS Installation Using SD card or USB Memory