9.3.1Display operation of main menu
The following four types of operation can display the main menu.
(Display the main menu after installing the Standard monitor OS from GT Designer3 to the
(1)When project data is undownloaded
After the GOT is turned on, a dialog box for notifying of absence of project data is displayed. After the dialog box is displayed, touch the OK button to display the main menu.
GOT power on
Touch the OK button.
(2)When touching menu call key
Touching the menu call key while
Horizontal display |
| Length display * |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*The utility screen is a factory installed horizontal format screen that cannot be edited.
The menu call key can be set by the GOT utility or GT Designer3.
For menu call key setting, refer to the following.
• 11.2.5 Utility Call Key Setting
•GT Designer3 Version1 Screen Design Manual (Fundamental)
4.9 GOT Display and Operation Setting (GOT Environmental Setting: GOT Setup)
POINT
(1)Prohibited simultaneous
Do not touch 2 points or more on the GOT screen simultaneously. Touching 2 points or more simultaneously may activate a part other than the touched point.
(2)Pressing time of the utility call key
When having set [Pressing time] of the menu call key setting screen to other than "0 (s)", keep pressing the touch panel for the period set to [Pressing time] or more before leaving the finger from the touch panel. For menu call key setting, refer to the following.
11.2.5 Utility Call Key Setting
(3)When the utility call key is set to the zero point
Even when the utility call key is set to the zero point, you can display the main menu using either of the following two operations:
•Pressing the special function switch set on the
•Keeping pressing the upper left corner while the [Booting.] message is displayed after powering up.
9 - 6 | 9. UTILITY FUNCTION |
| 9.3 Utility Display |