(3)Copy operation
Uploads the project data written in the C drive (Flash Memory) to the A drive
•Copying to another directory in the same drive
•Copying between A drive and E drive
Copy to/from C drive or copy to C drive/D drive is disabled. (This item explains using the A drive.)
1. Install SD card in the PC, in which create a folder for the copy destination.
Set the same character with [System Setting] of [System Environment] of GT Designer3 for the folder name.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Dialog for selecting a copy destination folder
2. Install the SD card mentioned above to GOT. For inserting/removing method of SD card/USB memory, refer to the following.
8.1.2 Installing and removing procedures of the SD card
8.2.2Installing and removing procedures of the USB memory
3.Open [Project Information] screen to select the file to copy.
4.Touching [Copy] button displays the message [Please select a destination.] in the left bottom of the screen.
5.If the copy destination folder is touched, the screen display is changed to the folder of copy destination. At this time, it cannot be copied into the same folder where the file exists.
Select other folders.
6. Touching [Exec.] button displays the dialog box shown left.
13 - 20 | 13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL) |
| 13.2 Various Data Control |