(b)Setup operation

Sets the project data stored in the A drive (Built-in SD card) to be used in the GOT. The GOT monitors using the monitor data in the A drive.

POINT

Before setup operation

When storing project data from GT Designer3 to SD card, select [A: Standard SD Card] for [Project Data] in [Boot Drive].

1.

2.

Mount the SD card to GOT. For the SD card installation/removal method, refer to the following.

8.1.2 Installing and removing procedures of the SD card

Touch [A: Built-in SD card] of [Select drive].

3. Touching [Download] button displays the screen shown on the left.

Touching [OK] button executes the setup.

4. When the setup is completed, the dialog box mentioned left is displayed.

Touching [OK] button restarts the GOT.

13 - 24

13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)

 

13.2 Various Data Control