Mitsubishi Electronics GOT1000 manual 153

7. Touch [OK] button.

If there is no file of the same name in the copy destination folder, starts to copy.

When there is a file of the same name in the copy destination folder, the dialog mentioned left is displayed without starting the copy.

If copy, in this case, the copied file is overwritten to the project data in the copy destination folder. Touching [OK] button starts copy.

Touching [Cancel] button cancels the copy.

8. When the copy is completed, the dialog of completion is displayed.

Touching [OK] button closes the dialog.

(4)Property display operation

Displays the property of the project data in the selected folder.

1.Touching [Property] button after selecting the project data to display the property displays the property as shown left.

In property display, the following information is displayed.

Item	Description
Date	Displays the creation date of the file.
Author	Displays the author of the project data.
Drawing S/W	Displays name and version of the drawing
version	software by which the project data is created.

2. Touching button scrolls up/down the screen by one line.

3. Touching button scrolls up/down the screen by one screen.

4. Touching [ ] button closes the property display and returns to the previous screen.

			9
			UTILITY FUNCTION
		10
	COMMUNICATION INTERFACE SETTING		(COMMUNICATION SETTING)
		11
	DISPLAY AND OPERATION SETTINGS		(GOT SET UP)
		12
	CLOCK SETTINGS AND BATTERY STATUS DISPLAY		(TIME SETTING AND DISPLAY)
		13
	FILE DISPLAY AND COPY (PROGRAM/DATA		CONTROL)
		14
GOT SELF CHECK		(DEBUG AND SELF	CHECK)
		15
		CLEANING DISPLAY	SECTION (CLEAN)
		16
INSTALLATION OF		COREOS, BOOTOS	AND STANDARD

13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)	13 - 21
13.2 Various Data Control