10.2Communication Detail Setting
10.2.1Communication detail setting functions
Function | Description |
Communication parameters | Set various communication parameters of communication devices. The settable parameters differ according to the |
setting | communication device. |
|
|
Keyword Register | For the FX series PLCs, key word for protecting program in the PLC can be set. |
|
|
Keyword Delete | For the FX series PLCs, key word for protecting program in the PLC can be deleted. |
|
|
Keyword Clear | For the FX series PLCs, the program protection status in the PLC can be cancelled. |
|
|
Keyword Protect | For the FX series PLCs with the 2nd keyword in use, the cancelled program protection in the PLC can be reactivated. |
|
|
10.2.2Display operation of Communication Detail setting
Communication settings
1. Touch the driver display BOX of the communication parameter to be set in the [Communication setting] screen.
2. The screen switches to the [Communication Detail setting] screen.
Set communication parameters from this screen. For the setting change operation, refer to the
Communication following. parameter
9.3.3 Basic operation of settings change
POINT
Communication parameter setting by drawing software
Select [Common Settings] 
[Communication Settings] from GT Designer3 to enter the communication parameters for each communication driver.
When changing the communication parameters after downloading project data, change the setting at communication detail setting of GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
10 - 8 | 10. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING) |
| 10.2 Communication Detail Setting |