Removing

1.

2.

Set the SD card access switch of the GOT to "OFF." Make sure that the SD card access LED turns off. When the SD card access LED turns off, the SD card can be installed or removed even during the GOT power on.

Push-in the SD card once and leave your finger, then remove the SD card.

POINT

Precautions for removing the SD card

(1)While the SD card access LED is on, do not install/remove the SD card or power off the GOT. To do so may cause data corruption or malfunction.

(2)When ejecting the SD card, support it by hand since it may pop out.

Failure to do so may cause a fall of the SD card leading to failure or damage of the card.

8 - 2

8. OPTION

 

8.1 SD Card