8.OPTION

8.1SD Card

The SD card is used to transmit the OS or project data and to save the data of the alarm history function. For details, refer to the following.

13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)

8.1.1Applicable SD card

The following SD cards are applicable for GOT.

Model name

Description

L1MEM-2GBSD

SD memory card 2GB

 

 

L1MEM-4GBSD

SDHC memory card 4GB

 

 

-

Commercially-available SD card*1

*1 Some models with the operations checked by our company are usable.

For the operation-checked models, refer to "Operation Check Results of Third Party SD Cards on GT14 Model" (Hime-T-P-0089) separately available, or contact your local distributor.

8.1.2Installing and removing procedures of the SD card

Install/remove the SD card with the power supply of GOT is OFF or SD card access switch is "OFF".

Installing

1. Set the SD card access switch of the GOT to "OFF", and make sure

that the SD card access LED turns off.

When the SD card access LED turns off, the SD card can be installed even during the GOT power on.

1

OVERVIEW

2

CONFIGURATION

SYSTEM

3

SPECIFICATIONS

4

PARTS NAME

5

EMC DIRECTIVE

STANDARDS AND

UL, cUL

6

SD card front face

2. Insert the SD card into the SD card interface with its front side (nameplate side) outside.

3. Turn the SD card access switch on.

After the SD card access switch is turned on, the SD card can be used.

INSTALLATION

7

WIRING 8

OPTION

8. OPTION

8 - 1

8.1 SD Card