18.2 Error Message and System Alarm

This chapter describes the error message and system alarm displayed in the GOT.

As the error code and error message displaying functions when an error occurs at the GOT, controller or network, there are two kinds: system alarm and advanced system alarm.

For details of the system alarm and advanced system alarm, refer to the following.

GT Designer3 Version1 Screen Design Manual (Functions)

POINT

Error code and channel No.

•Error codes can also be confirmed in the error code storage area of the system information function.

•The channel No. where an error is occurring can be confirmed with the GOT special register (GS262 to 264). For details of the system information and GOT special register, refer to the following manual.

GT Designer3 Version1 Screen Design Manual (Fundamentals)

18.2.1Error contents display

This section describes the example for displaying error code and error message on GOT.

Popup-displaying the error code and error message (Advanced alarm popup display (System alarm))

If an error occurs, the error code and error message can be popup-displayed on the front of the monitor screen. As alarms are popup-displayed regardless of the screen type, the error occurred will not be overlooked.

A 1254 A 1254

B 348 B 348

04/6/1 13:20 Power module

Pop up generated alarms regardless of the screen.

Displaying error code and error message in a list (Advanced system alarm display)

If error has occurred, error code and error message can be displayed on the list set with the screen. Multiple errors can be displayed, or the history of display can be recorded.

Occurred

Message

Restore

Check

04/6/1

10:25

Temp. error

 

 

04/6/1

8:05

Fuse error

11:25

10:45

Create a screen to display alarms, and confirm the details of the alarms and take measures.

17

INSPECTION

MAINTENANCE AND

18

APPENDICESTROUBLESHOOTING

18. TROUBLESHOOTING

18 - 11

18.2 Error Message and System Alarm