(5)Data check operation

Carries out data check of the selected project file.

When data is normal.

When data is erroneous.

1. Touch [Data check] button after selecting a data check target file.

The dialog mentioned left will be displayed after executing data check.

2. Touching [OK] button closes the dialog.

(6)Download operation/setup operation

(a)Download operation

Transfers the project data stored in the A drive (Built-in SD Card) or E drive (USB drive) to the C drive (Flash Memory). (The GOT monitors using the data in the C drive.)

(This item explains using the A drive.)

POINT

Before download operation

(1)Setup cancel

When the project data in the A drive is set up, the project data cannot be downloaded to the C drive.

Execute setup cancel ( (7) (b) Setup cancel operation) before downloading the project data.

(2)Project data to be stored in a SD card

When storing the project data from GT Designer3 to SD card, select [C: Built-in flash memory] for [Project Data] in the [Boot Drive].

13 - 22

13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)

 

13.2 Various Data Control