16.3.1Installing when starting the GOT
The displayed message is different depending on the installation condition of standard monitor OS. When the screen requesting operation is displayed, operate the GOT according to the instructions on the screen.
Operation procedure
(1)When installing with SD card
|
|
9 |
|
UTILITY FUNCTION |
|
|
|
10 |
|
Now installing BootOS.
Reboot.
1. Power OFF the GOT, switch the SD card access switch to OFF, and install the SD card where the BootOS, standard monitor OS or project data is stored in the SD card interface of the GOT.
2. Switch ON the SD card access switch of GOT.
3. Power on the GOT while pressing upper left corner of the GOT screen.
4. The BootOS or standard monitor OS is installed in the
The SD card access LED is lit during the install execution.
Do not pull out the SD card or power off the GOT while the SD card access LED is lit.
5. The GOT restarts automatically after the installation is completed.
(When the standard monitor OS is already installed, the GOT restarts by touching the [OK] button.)
6. After confirming normal restart, switch off the SD card access switch of the GOT. Confirm that the card access LED is not lit, and remove the SD card from the SD card interface of the GOT.
| COMMUNICATION | INTERFACE SETTING | (COMMUNICATION SETTING) |
|
|
|
| ||
|
| |||
| 11 |
| ||
| DISPLAY AND | OPERATION SETTINGS | (GOT SET UP) |
|
|
|
| ||
|
| |||
| 12 |
| ||
| CLOCK SETTINGS AND | BATTERY STATUS DISPLAY | (TIME SETTING AND DISPLAY) |
|
|
|
| ||
|
| |||
| 13 |
| ||
| FILE DISPLAY AND | COPY (PROGRAM/DATA | CONTROL) |
|
|
|
| ||
|
| |||
| 14 |
| ||
GOT SELF CHECK | (DEBUG AND SELF | CHECK) |
| |
|
| |||
|
|
| ||
15 |
| |||
| CLEANING DISPLAY | SECTION (CLEAN) |
| |
|
|
| ||
|
| |||
| 16 |
| ||
| INSTALLATION OF | COREOS, BOOTOS AND | STANDARD MONITOR OS |
|
|
|
|
|
|
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS | 16 - 5 |
16.3 BootOS and Standard Monitor OS Installation Using SD card or USB Memory