2. After selecting [Self], the transferred data and received data are verified through the self-loopback connector. When the GOT cannot receive the data during the data transmission, the dialog box shown left appears and the GOT restarts in five seconds. When the dialog box shown left appears, check the following.

•Check if the pins of the connector for self-loopback check are incorrectly shorted.

•Check if the channel number for the RS-232 interface is set to 0 ([None]) in the communication setting of the GOT utility.

( 10.1.3 Communication setting contents)

•Check if the hardware has no problems.

( 18. TROUBLESHOOTING)

3.During check, the dialog box shown left is displayed.

4. When the all checks ended normally, the dialog box shown left is displayed. And the GOT restarts in five seconds.

5. When an error occurs, the dialog box that shows the GOT abnormal termination and the byte with the error appears, and then the GOT restarts in five seconds.

When the dialog box shown left appears, check the following.

•Check if the hardware has no problems.

( 18. TROUBLESHOOTING)

14 - 16

14. GOT SELF CHECK (DEBUG AND SELF CHECK)

 

14.2 Self Check