Mitsubishi Electronics GOT1000 Self Check, 14.2.1Memory check, Memory check function, Display operation of Memory check

14.2		Self Check
The following describes the functions available as the self check function.
		Item						Description	Reference
			Carries out write/read check of the SD card, USB memory, built-in flash memory, or internal SRAM.
	Memory check								14-3
			[Password]	5	9	2	0
	Drawing check		Carries out missing bit check, color check and drawing check.						14-6
	Font check		Displays the character data on the screen to check visually.						14-10
	Touch panel check		Checks whether there are no dead zone area in the Touch key minimum unit (2 dots 2 dots).						14-12
	I/O check		Carries out RS-232, RS-422/485 connecting target confirmation and self-loopback check.						14-14
	Ethernet status check		Sends a ping to check the Ethernet connection status.						14-17

14.2.1Memory check

Memory check function

Memory check function carries out the write/read check of A drive (Built-in SD Card), C drive (Flash Memory), D drive (Internal SRAM) and E drive (USB memory).

Function	Description
A drive memory check	Checks whether the memory (Built-in SD card) of the A drive can be read/written normally.
C drive memory check	Checks whether the memory (Flash Memory) of the C drive can be read/written normally.
D drive memory check	Checks whether the memory (Internal SRAM) of the D drive can be read/written normally.
E drive memory check	Checks whether the memory (USB memory) of the E drive can be read/written normally.

Display operation of Memory check

Main Menu Debug & self check Self check

( 9.3 Utility Display)

Touch

Touch[Memory check] [self check]

Touch

[Debug & self check]

Memory check

Select the memory to check and touch [Check].

			9
			UTILITY FUNCTION
		10
	COMMUNICATION INTERFACE SETTING		(COMMUNICATION SETTING)
		11
	DISPLAY AND OPERATION SETTINGS		(GOT SET UP)
		12
	CLOCK SETTINGS AND BATTERY STATUS DISPLAY		(TIME SETTING AND DISPLAY)
		13
	FILE DISPLAY AND COPY (PROGRAM/DATA		CONTROL)
		14
GOT SELF CHECK		(DEBUG AND SELF	CHECK)
		15
		CLEANING DISPLAY	SECTION (CLEAN)
		16
INSTALLATION OF		COREOS, BOOTOS	AND STANDARD

14. GOT SELF CHECK (DEBUG AND SELF CHECK)	14 - 3
14.2 Self Check