(d)For changing passwords during editing, touch the password.
The New password input dialog box is displayed, and then input a password.
When the input is completed, touch the [Enter] key. When the password input is completed, the New password input confirmation dialog box is displayed.
Input the same password.
(e)For enabling the setting of [Make a permanent password], touch the check box for [Make a permanent password], and then the setting is switched.
: Disabled
: Enabled
(f)For using the external authentication ID, touch the check box "Use ext. auth. ID" and switch the setting.
: The external authentication ID is not used.
: The external authentication ID is used.
(g)Touch Ext.auth ID to display the external authentication ID input dialog box, and enter the external recognition ID. When the input is completed, touch the [Enter] key.
When the authentication method is set to "Fingerprint auth" or "External auth (general)", the external authentication ID can be input with the external authentication device.
3. Touch the [OK] button after all items are input, and then the dialog box shown left is displayed and the input operator information is added.
Touch the [Cancel] button or the 
button, and then the dialog box shown left is displayed.
|
|
|
|
|
|
|
| 9 |
|
|
|
| UTILITY FUNCTION |
|
|
|
|
| |
|
|
|
| |
|
| 10 |
| |
| COMMUNICATION INTERFACE SETTING | (COMMUNICATION SETTING) |
| |
|
|
|
| |
|
|
|
| |
|
| 11 |
| |
| DISPLAY AND OPERATION SETTINGS | (GOT SET UP) |
| |
|
|
|
| |
|
|
|
| |
|
| 12 |
| |
| CLOCK SETTINGS AND BATTERY STATUS DISPLAY | (TIME SETTING AND DISPLAY) |
| |
|
|
|
| |
|
|
|
| |
|
| 13 |
| |
| FILE DISPLAY AND COPY (PROGRAM/DATA | CONTROL) |
| |
|
|
|
| |
|
|
|
| |
|
| 14 |
| |
GOT SELF CHECK | (DEBUG AND SELF | CHECK) |
| |
|
|
|
| |
|
|
|
| |
|
| 15 |
| |
|
| CLEANING DISPLAY | SECTION (CLEAN) |
|
|
|
|
| |
|
|
|
| |
|
| 16 |
| |
INSTALLATION OF | COREOS, BOOTOS | AND STANDARD |
| |
|
|
|
|
|
13. FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL) | 13 - 79 |
13.2 Various Data Control |
|