Several drivers are assigned to the same Ethernet interface. However, only one GOT IP address is assigned per interface.
By changing the settings of one interface, the GOT IP address, GOT port No. download, default gateway and subnet mask settings of other drivers, which are assigned to the same interface, are also changed.
1. Touch the [Assign Ethernet I/F] button in Communication Setting.
2. Touch the driver display BOX of the communication parameter to be set in Ethernet I/F assignment.
3. The screen switches to the [Communication Detail setting] screen.
Set communication parameters from this screen. For the setting change operation, refer to the following.
9.3.3 Basic operation of settings change
POINT
Communication parameter setting by drawing software
Select [Common Settings] 
[Communication Settings] from GT Designer3 to enter the communication parameters for each communication driver.
When changing the communication parameters after downloading project data, change the setting at communication detail setting of GOT.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
|
|
|
|
|
|
|
| 9 |
|
|
|
| UTILITY FUNCTION |
|
|
|
|
| |
|
|
|
| |
|
| 10 |
| |
| COMMUNICATION INTERFACE SETTING | (COMMUNICATION SETTING) |
| |
|
|
|
| |
|
|
|
| |
|
| 11 |
| |
| DISPLAY AND OPERATION SETTINGS | (GOT SET UP) |
| |
|
|
|
| |
|
|
|
| |
|
| 12 |
| |
| CLOCK SETTINGS AND BATTERY STATUS DISPLAY | (TIME SETTING AND DISPLAY) |
| |
|
|
|
| |
|
|
|
| |
|
| 13 |
| |
| FILE DISPLAY AND COPY (PROGRAM/DATA | CONTROL) |
| |
|
|
|
| |
|
|
|
| |
|
| 14 |
| |
GOT SELF CHECK | (DEBUG AND SELF | CHECK) |
| |
|
|
|
| |
|
|
|
| |
|
| 15 |
| |
|
| CLEANING DISPLAY | SECTION (CLEAN) |
|
|
|
|
| |
|
|
|
| |
|
| 16 |
| |
INSTALLATION OF | COREOS, BOOTOS | AND STANDARD |
| |
|
|
|
|
|
10. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING) | 10 - 9 |
10.2 Communication Detail Setting |
|