Mitsubishi Electronics GOT1000 11.1.3Display operations, Language

11.1.3Display operations

Language

1. Touching the setting items displays the Select Language screen.

2. Touching the button of a desired language selects the language and returns the screen to the Display screen.

3. Touching [OK] button defines the setting contents.

Touching [] button without touching [OK] button displays the dialogue box shown on the left. [OK] button: The changed value is canceled, and the screen is closed.

[Cancel] button:The display setting screen is displayed.

4. Closing the display setting and GOT setup screens after completing the setting of all items to change with [] button restarts the GOT and reflects the setting contents.

HINT

(1)Selectable languages

The system message switch button is displayed only for the selectable languages. The selectable languages differ depending on the fonts installed in the GOT.

For the relation between the selectable languages and the fonts, refer to the following.

GT Designer3 Version1 Screen Design Manual (Fundamental) 2.5 Specifications of Applicable Characters

(2)System language switching using the device

The system language can be switched using the system language switching device set with GT Designer3. For the setting method of the system language switching device, refer to the following.

GT Designer3 Version1 Screen Design Manual (Fundamentals)

4.3 Language Switching Device Setting (GOT Environmental Setting: Language Switching)

			9
			UTILITY FUNCTION
		10
	COMMUNICATION INTERFACE SETTING		(COMMUNICATION SETTING)
		11
	DISPLAY AND OPERATION SETTINGS		(GOT SET UP)
		12
	CLOCK SETTINGS AND BATTERY STATUS DISPLAY		(TIME SETTING AND DISPLAY)
		13
	FILE DISPLAY AND COPY (PROGRAM/DATA		CONTROL)
		14
GOT SELF CHECK		(DEBUG AND SELF	CHECK)
		15
		CLEANING DISPLAY	SECTION (CLEAN)
		16
INSTALLATION OF		COREOS, BOOTOS	AND STANDARD

11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)	11 - 3
11.1 Display Setting