Turn the GOT power off.

8.6 USB Environmental Protection Cover

The USB environmental protection cover protects the USB connector on the front face of GOT from dust, water, and oil. The GOT is installed with the USB environmental protection cover at factory shipment.

Replace when damage and deterioration are caused.

8.6.1Applicable USB environmental protection cover

The following USB environmental protection cover is applicable for GT14.

Product name

Model name

Description

 

 

 

USB environmental

1

OVERVIEW

2

CONFIGURATION

protection cover

GT14-50UCOV Environmental protection cover for USB interface on the main unit front panel (conforming to IP67f)

SYSTEM

8.6.2Installing procedure

3

USB environmental protection cover

Open

Mounting screw

Mounting screw

M3 x 6 pan head screw

1.

2. Disconnect the USB cable from the GOT if one is connected.

3. Open the USB environmental protection cover equipped with the GOT and remove the mounting screws.

4. Remove the old USB environmental protection cover from the GOT to replace it with the new USB environmental protection cover.

5. Fix the projection of the new USB environmental protection cover to be fitted into the hole of the GOT, tighten the mounting screw in the specified torque range, then install it to the GOT.

Tighten the mounting screws in the specified torque range.

Not doing so may cause a damage or a drop. Specified torque range: 0.36 to 0.48N·m

SPECIFICATIONS

4

PARTS NAME

5

EMC DIRECTIVE

STANDARDS AND

UL, cUL

6

INSTALLATION

7

M3 x 6 pan head screw

POINT

Precautions when the USB environmental protection cover is opened

Environmental protective structure of USB interface is "IP2X" when the USB environmental protection cover is opened.

WIRING 8

OPTION

8. OPTION

8 - 9

8.6 USB Environmental Protection Cover