POINT
(1)Precautions for selecting [Do not maintain a network connection]
When selecting [Do not maintain a network connection], the GOT is disconnected from the network at the addition of a device with the same IP address as the GOT.
Therefore, there is a possibility that the running GOT cannot be communicated by IP address setting mistakes or intended actions by malicious users, and the system control may be influenced by those errors.
Please change the setting of [Behavior of duplicate IPs] after carefully examining the necessity.
(2)Precautions for using a switching hub compatible with the spanning tree protocol
For the switching hub port connected with the GOT, configure the setting (PortFast or others) that makes the GOT be ready for communications (forwarding state). The setting is required to make sure that the delay right after the connection by the spanning tree protocol does not occur.
Without the setting, the Ethernet IP address duplication is not correctly detected. Additionally, the GOT may not be connected to Ethernet correctly.
For the setting that makes the GOT be ready for communications (forwarding state), refer to the user’s manual for the switching hub used.
|
|
|
|
|
|
|
| 9 |
|
|
|
| UTILITY FUNCTION |
|
|
|
|
| |
|
|
|
| |
|
| 10 |
| |
| COMMUNICATION INTERFACE SETTING | (COMMUNICATION SETTING) |
| |
|
|
|
| |
|
|
|
| |
|
| 11 |
| |
| DISPLAY AND OPERATION SETTINGS | (GOT SET UP) |
| |
|
|
|
| |
|
|
|
| |
|
| 12 |
| |
| CLOCK SETTINGS AND BATTERY STATUS DISPLAY | (TIME SETTING AND DISPLAY) |
| |
|
|
|
| |
|
|
|
| |
|
| 13 |
| |
| FILE DISPLAY AND COPY (PROGRAM/DATA | CONTROL) |
| |
|
|
|
| |
|
|
|
| |
|
| 14 |
| |
GOT SELF CHECK | (DEBUG AND SELF | CHECK) |
| |
|
|
|
| |
|
|
|
| |
|
| 15 |
| |
|
| CLEANING DISPLAY | SECTION (CLEAN) |
|
|
|
|
| |
|
|
|
| |
|
| 16 |
| |
INSTALLATION OF | COREOS, BOOTOS | AND STANDARD |
| |
|
|
|
|
|
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP) | 11 - 23 |
11.5 Behavior of Duplicate IPs |
|