8.10 Panel-Mounted USB Port Extension

GT14-C10EXUSB-4S panel-mounted USB port extension is a waterproof extension cable of the USB. It is used to pull out the USB interface (host) on the back of GT14 to the surface of the control panel.

8.10.1Applicable panel-mounted USB port extension

The following panel-mounted USB port extension is applicable for GT14.

Model name

Description

GT14-C10EXUSB-4S

Panel-mounted USB port extension

 

 

8.10.2Parts name

The following shows the parts name of panel-mounted USB port extension.

Cap installation chart

Waterproof cap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ferrite core

Cable

 

 

 

 

 

USB plug

Seal

 

Nut

 

 

 

Model name label

 

8.10.3Installing procedure

Installed to panel

Install the panel-mounted USB port extension as follows with attention to a curve or a distortion of waterproof cap, seal, and nut.

Panel thickness: 2 to 4mm (0.08 to 0.16inch)

 

Nut

Seal

Waterproof

 

cap

 

20.8±0.1

(0.82"±0.01)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19.4±0.1

(0.77"±0.01)

Unit: mm (inch)

Panel Cutting Dimensions

•The panel thickness is 2.0 to 4.0mm.

•For panel-mounted USB port extension, the panel surface with waterproof cap is compatible with IP67f.

•Tightening torque of nut is 0.294 to 0.343N•m. Overtightening or undertightening may disable the waterproof effect.

•Tighten the waterproof cap properly when the cable is not used.

8 - 14

8. OPTION

 

8.10 Panel-Mounted USB Port Extension