16.INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
For executing the GOT utility, install the BootOS and standard monitor OS on the C drive
(BootOS is installed in the GOT at factory shipment. It is not necessary to install BootOS when upgrading of it is unnecessary.)
This chapter explains the installation using GOT.
|
|
9 |
|
UTILITY FUNCTION |
|
|
|
|
|
10 |
|
COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING) | |
GT Designer3 SD card/ | GOT |
USB memory
Write
OS file
SD card/USB memory *1
GT Designer3
Write | SD card | |
OS file | ||
|
Set the OS boot drive to [A: Standard SD Card].
BootOS or standard monitor OS installation
Install the SD card in GOT
Install the SD card in GOT
When GOT is remote, installed easily using the CF card/ USB memory
The GOT can starts without an OS installed.
|
| ||
11 |
| ||
DISPLAY AND | OPERATION SETTINGS | (GOT SET UP) |
|
|
| ||
|
| ||
12 |
| ||
CLOCKSETTINGS AND | BATTERYSTATUS DISPLAY | (TIMESETTING AND DISPLAY) |
|
GOT SD card/ | GOT |
USB memory
OS file upload
BootOS or standard monitor OS installation
Install OS from GOT to GOT using CF card/USB memory.
*1 | Install the SD |
SD card/USB memory | card/USB |
| memory in GOT |
13 |
FILE DISPLAY AND COPY(PROGRAM/DATA CONTROL) |
*1 When execute installation with USB memory, standard monitor OS has to be installed in GOT in advance.
For the writing of OS in GT Designer3, refer to the following.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
POINT
CoreOS
In 16.1 to 16.4 of this chapter, only BootOS and standard monitor OS are described.
For CoreOS, refer to the following.
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS | 16 - 1 |
|
|
|
14 |
| |
GOT SELF CHECK (DEBUG AND SELF CHECK) |
| |
|
| |
|
|
|
15 |
| |
| CLEANING DISPLAY SECTION (CLEAN) |
|
|
|
|
|
| |
| 16 |
|
| INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS |
|
|
|
|