10.2.3Display contents of Communication Detail setting
The contents of communication detail setting varies according to driver type.
This section explains setting items different from the communication detail setting of the drawing software. For setting items other than described in this section, refer to the following manual.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Communication detail setting of host (modem)
On the communication detail setting screen of host (modem), the communication setting between the GOT and the modem and the modem operation can be executed.
Item | Description | Setting range | |
PC connection type | Select the connection method to the PC. | Host (PC) / Host (Modem) | |
<Default: Host (PC)> | |||
|
| ||
|
|
| |
Transmission Speed | Set the transmission speed when communicating. | 9600/19200/38400/57600/115200 | |
<Default: 115200> | |||
|
| ||
|
|
| |
Data Bit | Set the data bit when communicating. | 7bit/8bit <Default: 8bit> | |
|
|
| |
Stop Bit | Set the stop bit length when communicating. | 1bit/2bit <Default: 1bit> | |
|
|
| |
Parity | Set whether to execute or not the parity check during | Odd/Even/None <Default: Odd> | |
communication. When executing, set the type of the parity check. | |||
|
| ||
|
|
| |
Init. AT command | Set the AT command for initialize the modem. | <Default: AT & FE0%C0 & K0 & D0W2S0=1> | |
|
|
| |
Modem operation | Touch the [Init.] button to initialize the modem. | - | |
Touch the [Cut] button to disconnect the line. | |||
|
| ||
|
|
|
10 - 10 | 10. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING) |
| 10.2 Communication Detail Setting |